-
The important role of open chillers
Open type chillers typically use temperature sensors to measure the temperature of the warm fluid and transmit the data to the controller in the control section The operating principle of an open type chiller is composed of a water tank, a heating and cooling system, a power transmission system, a liquid level control system, as well as temperature sensors, injection ports, and other components. If the open type chiller is in production, the controller will open the solenoid valve to connect the inlet pipe. If the mold temperature is lower than the set value, in modern factories. Save manpower. The use of open chillers and the advancement of mold lifespan are necessary means of advancing productivity. They are also called temperature control systems or open chillers in rubber mixing equipment. After heating up in rubber equipment, a long-term cooling process is required, and the mold temperature exceeds the set value of the controller. In response to market competition, the mold temperature is directly regulated. The business strategy of advancing quality and reducing costs is urgent. Until the temperature of the warm fluid is reached, the preheating time of the mold can be reduced, the surface quality of the finished product can be improved, and fully automated production can be achieved, that is, the temperature of the mold returns to the set value. The use of the temperature control machine in other work is a necessary condition for the composition of the equipment. The controller regulates the temperature of the warm fluid, which is called an oil heater in PVC sheet roller temperature control; In extruder equipment, it is called a temperature control device; The controller will turn on the heater, and among these devices, there is basically a process of rapid heating followed by insulation. Because of the operating principle of an open type chiller.
The actual title of an open type chiller should be called a water-cooled box type chiller, which is widely used in various industries such as plastic molding and light guide plates In modern factories, the business strategy of saving manpower, improving quality, and reducing costs in response to market competitions is urgent. The use of water temperature machines can reduce the preheating time of molds, improve the surface quality of products, and enable fully automated production Advancing mold lifespan is a necessary method for advancing production capacity In a broad sense, it should be called an open type chiller, which includes temperature control for both heating and cooling Open type chillers are widely used in plastic work, and their main functions are: 1. to improve the molding efficiency of products; 2. Improve the appearance of products and suppress their defects; 3. Accelerate production progress, reduce energy consumption, and save energy The application of thermal oil furnace in die-casting work also has a lot of space, so it can be called an open type die-casting chiller according to the work. In rubber mixing equipment, it is called a temperature control system or temperature controller, and in hot press operation, it is called a thermal oil furnace. Especially in the manufacturing of magnesium alloys and aluminum alloys, uneven or inappropriate mold temperature can cause unstable casting dimensions, deformation of castings during production, and defects such as thermal pressure, mold sticking, surface depression, internal shrinkage, and hot bubbles The production cycle is also affected by unstable variables such as filling time, cooling time, and spraying time In addition, after heating up in rubber equipment, a long-term cooling process is required The application of temperature control machines in other work is a necessary condition for the composition of the equipment,
Refrigeration Encyclopedia
CN
EN
Official weibo/
Online message/
Contact us/
Legal notices
Production equipment
Production equipment
Production equipment
Production equipment
Production equipment
Production equipment
CCTV
